The M-120e Digital Amplifier supports four rooms of audio at 30 Watts per zone. Its smaller form factor offers flexibility with placement of the unit, enabling installation into a structured wiring enclosure or wall mounting. The M-120e provides simultaneous amplification for two local source inputs or two eAudioCast™ network streams in as many as 96 rooms.
Wired with a simple Cat5 connection, the M-120e can be placed throughout the home or accessed wirelessly when used with the MMS-1e Mirage Music Streamer.
High-resolution Support
All eSeries amplifi ers support high-resolution audio (HRA), at 24bit/192kHz using proprietary eAudioCast™ audio over Ethernet.
Installation Flexibility
The small form factor, eAudioCast technology, and the included mounting accessories afford installers with maximum fl exibility in placement. The M-120e can be mounted on a wall near zone speakers, or in a structured wire cabinet. Distributed eSeries components stream audio and control signals through the home network using a single Cat-5e connection to a router or switch.
Virtually Unlimited Zones
Multiple eSeries amplifiers can be utilized in any combination on a single ethernet network to support up to 96 zones of high-resolution audio with network-wide grouping capabilities.
Many Control Options
The entire system can be controlled using the Mirage Media Controller application for iOS and Android devices, and eSeries audio systems are fully compatible with the rich library of Autonomic Control System modules for all major automation platforms.
Product Manuals and Specification Sheets
M-120e Product Specification Sheet
M-120e Product Manual
Autonomic Music Without Limits
Control Modules
Autonomic AMX Module
Autonomic Control4 Module
Autonomic Crestron Module
Autonomic RTI Module
Autonomic URC Module
M-120e Product Specification Sheet
M-120e Product Manual
Autonomic Music Without LimitsControl Modules
Autonomic AMX Module
Autonomic Control4 Module
Autonomic Crestron Module
Autonomic RTI Module
Autonomic URC Module
Important Note - Autonomic Amplifiers (models M-801e, M-401e, and M-120e) do not short speaker negative terminals. Use of any devices that use a common ground, including but not limited to, speaker level volume controls, speaker selectors and speaker level subwoofer connections are not supported for use with the M-801e, M-401e or M-120e. Use of any of these devices will result in damage to the amplifier and will void the amplifier's warranty.
- Rated Output Power All Channels:
- 15W per channel, 8Ω loads
- Total Harmonic Distortion (THD):
- <0.1% (10 Watt, 8Ω load)
- Speaker Impedance (Z1-Z4):
- 0.72V / 22KΩ
- Balanced Audio:
- 0.72V / 680Ω
- Frequency Response:
- 20Hz–20kHz
- Tone Control:
- ±12dB, 100Hz (Bass) ±12dB ,10kHz (Treble)
- Signal-to-Noise Ratio:
- 96dB (IHA-A, 1V input / unbalanced)
- Source Inputs:
- (2) Analog source inputs, (2) Digital PCM outputs for zones 1 & 2 Impedance: 75Ω 0.5V RMS, (4) powered speaker channels
- LAN Connection:
- (1) 8-wire RJ45 with 2 LED indicators; 10/100 Mbits/sec BaseT Ethernet port; green LED indicated link status; yellow LED indicated Ethernet activity
- Keypad Controllers:
- 2) KP-6 In-wall keypad controller ports
- Infrared Out:
- (1) IR transmit for control of third-party devices; 3.5mm jack current limited to 25mA
- Zones:
- (4) Zones, expandable to 96 zones with additional supported Autonomic amplifiers
- Audio Adjustment:
- Per-zone adjustments for Bass, Treble, Balance, Loudness, Audio Delay (up to 600ms), Zone Linking
- Power Supply:
- 100–240V AC Ext DC 15V @ 5.3
- Power Consumption:
- 79.5W
- Environmental Requirements:
- Humidity: 10% to 90% RH (non-condensing) Temperature: -13˚F to 185˚F (-25˚C to 85˚C)
- Dimensions:
- 6.5" x 5.8" x 1.4" (165mm x 147mm x 35mm)
- Net Weight:
- 2 Ibs (0.85 kg)
- Mounting:
- (4) brackets for structured wire cabinet / wall mount
- Warranty:
- 2-year limited warranty
